Paint sheen — how much light the paint reflects — is one of the most practical decisions in a renovation, and one of the least talked about. The same colour in matte, eggshell and satin looks different, wears differently, and shows flaws differently. Choosing the right sheen for each room matters as much as choosing the colour. We are a general contractor serving Toronto, Mississauga, Oakville and Burlington, with 11 years of experience, licensed & insured with $2M liability. Nacho and Milu organize and coordinate every project, and all trades are done by licensed specialists.
Matte paint reflects almost no light, which makes it the most forgiving finish there is: it hides uneven walls, patch marks and small imperfections that a shinier paint would show. That is why it is the usual choice for ceilings, and for walls in rooms where the walls are not perfectly flat — which, in an older Toronto home, is most of them.
The trade-off is durability. Matte paint marks easily and is the hardest to clean — a scuff or a splash can leave a mark that does not wipe off. It suits low-traffic rooms: bedrooms, ceilings, a formal living room. It does not suit a hallway, a kitchen, or a child's bedroom.
Eggshell sits between matte and satin: a soft, low sheen that reflects a little light without looking shiny. It is the most common choice for living room and bedroom walls, because it is a good compromise — it hides most flaws, it is more washable than matte, and it gives the walls a subtle depth that flat paint does not have.
Eggshell is the safe default for most walls in a home. If you are unsure which sheen to choose, eggshell is usually the right answer for the walls, with a harder finish on the trim.
Satin reflects more light than eggshell, and it is harder-wearing and easier to wipe clean. That makes it the right choice for rooms that get touched, splashed or cleaned often: hallways, kitchens, bathrooms, children's rooms, and any wall that will be wiped down. It is also the usual finish for trim — baseboards, door frames, window casing — because trim is touched every day and needs to be cleaned without losing its finish.
The trade-off is that satin shows flaws. A wall with patches, an uneven surface, or a repair that is not perfectly smooth will show under a satin finish in a way it would not under matte. Satin belongs on walls that are well prepared and flat.
Ceilings: matte, almost always — it hides the seams and the patches. Bedrooms and living rooms: eggshell for the walls, satin for the trim. Hallways and stairs: satin or eggshell on the walls, because they are touched constantly. Kitchens and bathrooms: satin on the walls, because they need to be wiped clean. Trim throughout: satin or semi-gloss, in the same white across the whole home.
The sheen should be decided with the colour, in the design phase, because the two work together: a dark colour in a satin finish looks very different from the same colour in matte, and a wall that will be lit by downlights needs a flatter finish than one that will not.
A shinier paint is only as good as the wall underneath it. If a wall is going to be satin, the drywall work has to be to a higher standard — the seams feathered wider, the sanding more careful, the primer even — because the paint will show what matte would hide. That is why the finish is agreed in the design phase, not at the paint store: the drywall work and the paint finish are planned together, by the licensed specialists who do them, coordinated by us.
Message us on WhatsApp at (416) 706-3577 for a free painting quote
Tell us about your home — the rooms and the finishes you want — and we will walk you through the six stages. Now booking January 2027.