A wood slat media wall is a wall of vertical timber slats, usually with the TV mounted flush in the middle and often an electric fireplace below. It is the most popular media wall style we build, because it suits almost any living room and ages well. But a slat wall that looks simple is not simple to build: the slats have to be straight, evenly spaced and firmly fixed, or the eye catches every flaw. Here is how one is built.
A slat wall is not stuck onto a bare wall. It starts with a backing — a framed structure or a panel fixed to the existing wall — that gives the slats something straight and solid to fix to. The backing also hides everything the wall needs: the cables, the TV mount reinforcement, the power supply for the LED lighting and the opening for the fireplace, if there is one. The backing is levelled and plumbed carefully, because any wave in the backing will show in the slats. This is the part of the job nobody sees, and it is the part that decides whether the finished wall looks professional.
The slats themselves are usually solid timber or a timber veneer on a stable core. Light oak is the most common choice in Toronto homes — it suits bright rooms and modern furniture — but walnut, ash and darker stained timbers all have their place. The width of each slat and the gap between slats set the character of the wall: narrow slats with tight gaps look fine and tailored; wider slats with bigger gaps look bolder and more rustic. The choice is yours in the design phase, and it is worth looking at samples in your own room's light before deciding, because timber changes colour noticeably between a showroom and a living room.
Each slat is cut to length, finished, and fixed to the backing in order, with the spacing checked as the work goes along. The spacing has to be even across the whole wall — the eye is very good at spotting a gap that is a few millimetres out. Slats are usually fixed with adhesive and concealed fixings, so no nail or screw head shows on the face. Where the TV mounts, the backing is reinforced so the mount is fixed into structure, not just into a slat. Where the fireplace sits, the opening is cut and finished before the slats go on, so the edges are clean. The work is done by a carpentry specialist, coordinated by us as part of the build.
The TV mounts flush against the slat wall, usually on a bracket fixed through the slats into the reinforced backing. The bracket position is set during construction, based on the TV's size and the viewing height decided in the design phase. The cables run behind the slats and through the backing to a hidden compartment. If there is an electric fireplace, it sits in an opening framed into the backing, with its clearances and ventilation built to the unit's specifications. The fireplace and the TV are fitted after the slats are finished, so neither is damaged during the carpentry work.
LED strips are often fitted behind the slats or along the top and bottom of the wall, and they are installed before the slats go on — the wiring and the driver hide in the backing. A strip behind the TV washes light onto the slats around the screen; strips at the edges make the wall glow. The driver, the small power supply for the LEDs, is placed somewhere reachable, behind a removable panel or inside a cabinet, because it will need replacing one day. Lighting is decided in the design phase, not added afterwards, because adding it later means removing slats.
A timber slat wall needs very little maintenance: regular dusting, and a wipe with a barely damp cloth when it needs it. Timber moves with the seasons — it swells slightly in humid summers and shrinks in dry winters — so a small amount of movement in the gaps is normal and not a defect. What matters is that the wall was built with that movement in mind, with fixings that hold the slats while letting the timber breathe. Keep the wall out of direct, constant sunlight where you can, because strong sun will fade the timber unevenly over time. And if a slat is ever damaged, it can usually be replaced on its own, without touching the rest of the wall.
Message us on WhatsApp at (416) 706-3577 for a free media wall quote
Tell us about your wall and your TV, and we will walk you through the six stages. Message us to confirm current availability at the site visit.